Fabrication of Steel Gates and Fences

We are specialists in the fabrication of steel gates and fences.

In the photo attached, one of our tradesmen, Jake is building a 1800 high steel gate to be installed at an Industrial property.

When you have a project that requires steel gates and fences, talk to our commercial estimators at Fencing Brisbane.

Phone 3265 3922 to speak to the guys about your project.

In most cases, large steel gates are made out of either 25nb or 32nb pipe. Gates can either have a galvanised finish, or powdercoated the colour of your choice.

We design and build steel gates and fences for both Domestic and Commercial properties.

We often fit chainwire onto our steel gates and fences.

Some information about chainwire

Fencing Brisbane has been a long term supplier of chain wire into the South East Qld market. Chain wire comes in two main thicknesses… 2.5 and 3.15. For more heavy duty applications and where security is more of an issue, 3.15 is sometimes selected, however 2.5 is the most common guage.

The size of the diamond is another decision to make with the main options being 50mm and 60mm diamond, measured diagonally across the diamond. Chain wire comes is various heights, with the most common being 1200mm, 1500mm, 1800mm and 2100mm. Another decision to be made is whether the chain wire will have a “barb” or “knuckle” finish. This decision will depend on the level of security required.

Fencing Brisbane has been operating out of its northside factory since the 1960’s. They are one of the most well established and reputable fencing suppliers and installers in Brisbane. When you deal with Jory’s you get plain talk and clear timeframes.